Cage Nuts
A cage nut is a square nut floating in a spring-steel cage. Squeeze the two wings, snap it into a square hole in a rack rail or cabinet panel, release — the cage holds it and the nut floats a little, so the bolt still lines up when the hole is a millimetre out. The standard fastener for 19-inch racks, cabinets and enclosures.
Choosing the square hole
Match the cage to the square hole in your rail or panel: 9.5 × 9.5 mm is the 19-inch rack standard; 8.3 × 8.3 mm, 8.5 × 8.5 mm and 9 × 9 mm fit compact cabinets and shallow rails.
Panel thickness
Check the panel thickness band for each type — the cage depth changes with the thickness band.










